The industry standard of the hottest aluminum anti

2022-08-06
  • Detail

The aluminum anti-counterfeiting bottle cap industry standard has passed the review of experts.

the aluminum anti-counterfeiting bottle cap industry standard drafted and formulated by the national packaging Standardization Technical Committee has passed the review of industry experts and users from August 8 to 10, and will be submitted to the national development and Reform Commission for approval before release and Implementation. Wang Li, Deputy Secretary General of China Packaging Federation, presided over the review meeting held in Yantai

aluminum anti-counterfeiting bottle cap mainly refers to the bottle cap with anti-counterfeiting function composed of aluminum cylinder. In recent years, it has been widely used in wine, medicine and health care products. The company has set up a new standard for pultrusion molding, cosmetics and other products. Although there are national standards for these products (the National Bureau of quality and technical supervision formulated the standards in 1993), with the continuous development of the industry for more than a decade, many technical indicators have been unable to fully meet the existing production and use requirements, bringing inconvenience to production and use

according to the requirements of the national development and Reform Commission's Announcement No. 46 in 2006 "the number and name of 445 national standards adjusted to industrial standards", the original national standard gb/t14803-1993 "twisted aluminum anti-theft bottle caps for packaging containers" has been transformed into bb/t0034-2006 "twisted aluminum anti-theft bottle caps for packaging containers" packaging industry standard, and included in the 2006 revision plan (the standard name is tentatively determined as "aluminum anti counterfeiting bottle caps"). The standard is under the centralized management of the national packaging Standardization Technical Committee, and Shandong Lipeng Packaging Co., Ltd. and the national packaging product quality supervision and Inspection Center (Guangzhou) are responsible for organizing the revision

after the task of formulating the packaging industry standard for aluminum anti-counterfeiting bottle caps was assigned, Shandong Lipeng Packaging Co., Ltd., Yantai Haipu capping Co., Ltd., national packaging product quality supervision and Inspection Center (Guangzhou) and other units organized forces to complete the drafting of the standard discussion draft in a relatively short time, and held a drafting working group meeting in Shangyu, Zhejiang on November 13, 2006. Eleven representatives from the national packaging Standardization Technical Committee, the national packaging product quality supervision and Inspection Center (Guangzhou), Shandong Lipeng Packaging Co., Ltd., Hainan Yedao capping factory and Yantai Haipu capping Co., Ltd. discussed the standard revision discussion draft and made arrangements for the next step. In the first ten days of January this year, the working group completed the drafting of the standard consultation draft, and submitted it to Beijing scrape pull bottle cap Co., Ltd., Hainan Yedao bottle cap factory, Jiangsu Shuanggou Liquor Co., Ltd., Sanle 14, displacement resolution: 0.001mm pulp Pharmaceutical Group Huamei Pharmaceutical Co., Ltd., Jinpai Co., Ltd., Chongqing Great Wall bottle cap factory, Yibin Wuliangye Pushi Co., Ltd., aokeya international bottle cap system (Tianjin Co., Ltd 25 related enterprises including Shanxi Yahua cap making company, Zhejiang Huangyan Hualin bottle cap factory, Shandong Dongguan bottle cap Co., Ltd. and Siyang Yida aluminum products Co., Ltd. solicited opinions, formed a draft for review on this basis, and submitted it to this review meeting for review

the standard that passed the review and gb/t14803-1993 twisted aluminum anti-theft bottle cap for packaging containers are mainly modified as follows:

the name of the standard is changed to aluminum anti-counterfeiting bottle cap; Cancel the classification by contents, and add the classification by opening form and pressure state; Cancel the specific data content of the specification and size of the bottle cap, only stipulate that the size of the bottle cap can not move the accuracy of the beam part of the electronic universal testing machine and partially adjust it. The specification of the bottle cap is applicable to the bottle mouth specified in gb/t17449 screw neck size of packaging glass containers. In addition, the standard also adds some contents, mainly adding requirements for materials; The appearance requirements are partially modified; The requirements for the same color difference of the same batch of bottle caps are added; The requirements for alcohol resistance of inner and outer surface coatings are added; The temperature resistance test method is adjusted according to the applicability of the bottle cap; Delivery inspection shall be carried out according to gb/t2828.1; Type inspection shall be carried out in accordance with gb/t2829

more than 20 professionals from some major enterprises in the industry and representatives of some major users, such as Beijing Red Star Co., Ltd. and Hubei Jin Liquor Factory, attended the meeting. Wearing abrasive particles collided with charged particles (generally with electric spark) at high temperature. Everyone spoke enthusiastically at the meeting and put forward some good suggestions for revision of the draft submitted for review. Shandong Li Li packaging Co., Ltd. gave strong support to the successful convening of the conference

Copyright © 2011 JIN SHI